01373 229139 info@broadlanelandrovers.co.uk Unit 16, Woodland Industrial Estate, Eden Vale Road, Westbury, Wiltshire, BA13 3QS
Monday – Friday: 9.00am – 6.00pm

Projects

Chassis Swaps
22 / 02 / 2020.
When Land Rover built Series & Defender's they were put on box-section mild steel chassis which meant they were prone to rust the moment they left the factory. Unless you're regularly treating the internal sections of the chassis, which is a task in itself, then your Defender is  prone to…
read more

Bulkhead Replacement
22 / 02 / 2020.
Back in May 2019 we took over a bulkhead and door replacement on a Defender 90 which had been half completed by another garage (not local to us). It had been with the bodyshop for a very long time so it was long out of MOT and had been stood…
read more

Picoscope Diagnostics
22 / 02 / 2020.
  We have just invested over £3.5k in Picoscope diagnostic equipment which will enable us to be able to perform very in-depth diagnostic and fault finding with all models of Land Rover and Range Rover.  It take a lot of experience, training and education to be able to translate the…
read more

Dinitrol – Before and After
22 / 02 / 2020.
Please see below for a few examples of recent Dinitrol Treatments carried out by us. Defender 90 (Before/After) [ngg src="galleries" ids="3" display="basic_thumbnail"] Mazda MX5 (Before/After) [ngg src="galleries" ids="4" display="basic_thumbnail"]
read more

Rebuilding a Defender 110 – Stage 1
22 / 02 / 2020.
We were tasked by the customer to collect and re assemble his beloved Defender 110 which had already been partially restored (painted bulkhead and tub). The first stage of the rebuild was to strip it back down to the chassis and rebuild from the ground up as we weren't sure…
read more

Chassis Swap on a Defender 90
22 / 02 / 2020.
This 90 was sentimental for the Customer and he was keen to keep it on the road, however the chassis had rotten away beyond the point of repair. The Customer opted to replace the Chassis with a high quality galvanised Marsland chassis. It is now back on the road and…
read more

Bulkhead Replacement on a 110
22 / 02 / 2020.
We would always prefer to repair over replace when it comes to keeping the costs down for Customers running an older Land Rover. In this case though, we simply had to replace the bulkhead due to the extent of the rust (as you can see!). We had a second hand…
read more

Invisible Repair
22 / 02 / 2020.
Sometimes repair over replacement is a more cost effective solution but it doesn't mean you have to compromise on the quality of finish. [ngg src="galleries" ids="7" display="basic_thumbnail"]
read more

Bespoke enhancement – adding a window to a Defender 90
22 / 02 / 2020.
A customer wanted to know if it was possible to put a window in the side of her Defender 90. See the photos for the development of the project and the end result! [ngg src="galleries" ids="8" display="basic_thumbnail"]
read more

Series 3 200tdi Engine Conversion
22 / 02 / 2020.
We're recently completed a 200tdi engine conversion in a Series 3 88". We used a Steve Parker Exhaust system to get the gasses out the back and custom boost hoses to get them in the front. We ran with the turbo but no intercooler. The original radiator was used to…
read more

Defender 130″ Chassis swap
22 / 02 / 2020.
The customer wanted his Land Rover Defender 130" to live on forever so we've completed fitting a new Richard galvanized chassis (painted body colour), new galvanized doors and a galvanized bulkhead from Ashtree Land Rovers. We also did some other work whilst it was apart including timing belt, clutch, brake…
read more